Description
Ortofon OM30 Stylus replacement. A slip on replacement stylus assembly for all cartridges in the Ortofon OM range. Can be used to replace the stylus on the OM30 or to upgrade OM5e, OM10 and OM20 cartridges to an OM30.
Please Note: This is a replacement stylus assembly. It is not a complete Cartridge
Specification
|
Output voltage at 1000 Hz, 5cm/sec. |
4 mV |
|
Channel balance at 1 kHz |
1 dB |
|
Channel separation at 1 kHz |
25 dB |
|
Channel separation at 15 kHz |
15 dB |
|
Frequency range |
20-29.000 Hz |
|
Frequency response |
20-20.000 + 2 / - 0 dB |
|
FIM distortion at recommended tracking force, DIN 45.542 |
< 1% |
|
Tracking ability at 315Hz at recommended tracking force |
90 µm |
|
Compliance, dynamic, lateral |
25 µm/mN |
|
Stylus type |
Nude Fine Line |
|
Stylus tip radius |
r/R 8/40 µm |
|
Equivalent stylus tip mass |
0,3 mg |
|
Tracking force range |
1,25-1,75 g (12,5-17,5 mN) |
|
Tracking force, recommended |
1,5 g (15 mN) |
|
Tracking angle |
20° |
|
Internal impedance, DC resistance |
1 kOhm |
|
Internal inductance |
580 mH |
|
Recommended load resistance |
47 kOhm |
|
Recommended load capacitance |
200-400 pF |
|
Cartridge colour, body/stylus |
Black/Black |
|
Cartridge weight |
5 g |
|
